PrimaCreator Resin Cleaner is an effective IPA alternative for cleaning resin-printed 3D models.

• Minimal odor
• Highly effective
• Minimal evaporation and easier to handle
• Suitable for ultrasonic cleaners

PrimaCreator Resin Cleaner resin cleaning agent

When you are looking for an effective and safe solution for cleaning 3D-printed resin models, PrimaCreator Resin Cleaner is the right product for you.

Resin Cleaner is a high-quality European product that serves as an IPA alternative (isopropyl alcohol) and offers many advantages

• Minimal odor – Resin Cleaner does not have an unpleasant, harsh smell
• Highly effective – Resin Cleaner breaks down uncured resin and dissolves it within minutes
• Easy to handle – Resin Cleaner is not a hazardous substance, non-flammable, and evaporates more slowly to minimize product loss during handling
• Wide application range – Resin Cleaner can be used with nearly any DLP or SLA resin

Instructions

1. Submerge the model in the resin cleaning agent for 10-15 minutes and shake/move it every 2 minutes to loosen the uncured resin. If using an ultrasonic cleaner or cleaning station, the process is much faster.
2. Check periodically to see if all uncured resin has dissolved. If satisfied, rinse the product with water to remove excess resin and resin cleaning agent
3. Cure the model according to your resin’s instructions. Resin Cleaner can be used multiple times; replace it if cleaning effectiveness decreases.