[woo_category_tree]
The Marmitek TV Anywhere Wireless HD 2 is a wireless Full-HD HDMI system that enables audio and video signal transmission wirelessly up to 100 meters away. This device is designed to facilitate watching television broadcasts in different rooms without extra cables or moving the set-top box. It works through walls and ceilings, making it a flexible solution for placement in areas such as lofts, bedrooms, or sunrooms.
The system transmits HDMI signals wirelessly at up to 1080p resolution and supports multiple video modes such as 480p, 576p, 720p, and 1080p. The signal can travel up to 100 meters, even through walls and ceilings, without significant quality degradation or delay. This allows you to enjoy HD content anywhere in your home without connecting cables.
The TV Anywhere Wireless HD 2 includes infrared control, enabling remote control of AV devices even if the devices are not visible. The transmitter and receiver support IR signals at frequencies between 20–60 kHz, so you can, for example, change channels from another room. Additionally, the device is compatible with televisions and projectors, increasing its versatility for home entertainment.
The system consists of a transmitter and a receiver connected via HDMI ports. The transmitter is connected to an HDMI source such as a set-top box or Blu-ray player, and the receiver to another television or projector. The devices are ready to use immediately after connection, with no complex installation required.
The transmitter has both HDMI input and output, allowing you to connect multiple devices in series and watch the same content in two different rooms simultaneously. This makes it easier to follow sports broadcasts in different rooms without needing to switch cables or devices.
The system supports HDMI 1.4 standard and HDCP 1.3 copy protection. The audio format is PCM stereo, and the video compression format is H.265. The operating frequency is 5 GHz, and latency is under 120 ms, ensuring smooth video and audio transmission.
The transmitter and receiver measure 115 x 60 x 18 mm and each weigh approximately 170 grams. The power supply operates on 100–240 V AC voltage and converts it to 5 V DC for the devices.
The Marmitek TV Anywhere Wireless HD 2 offers a convenient way to watch HD-quality television or other HDMI sources wirelessly in different rooms without running cables. It is well suited for home use when you want to watch the same content in multiple locations or control AV devices remotely.
| Color | Black |
|---|---|
| Country of Origin | China |
| PID | 1042651 |
| Product depth (mm) | 60 |
| Product height (mm) | 18 |
| Product weight (g) | 172 |
| Product width (mm) | 115 |
| Manufacturer address | Hondsruglaan 93, 5628 DB, Eindhoven, The Netherlands |
| Manufacturer's email address | |
| Manufacturer name | Vogel's Products B.V. |
| Warnings | Läs säkerhetsanvisningarna noggrant och se till att du förstår allt. Felaktig användning gör att Marmiteks garanti upphör att gälla. Enheten är endast avsedd för inomhusbruk. Använd inte produkten i fuktig miljö eller i närheten av vatten. Utsätt inte produkten för extremt höga eller låga temperaturer, starka ljuskällor eller direkt solljus. Denna produkt är ingen leksak; förvara den utom räckhåll för barn. Anslut adaptern till elnätet först efter att du har kontrollerat att nätspänningen är den som anges på märkskylten. Anslut aldrig adaptern om den är skadad, kontakta i sådana fall säljaren. Koppla bort AC/DC-adaptern från elnätet om produkten inte ska användas under en längre tid. Öppna aldrig produkten eftersom den kan innehålla delar som är elektriskt strömförande. Felaktig användning, modifiering eller reparation gör att alla garantier upphör att gälla. Marmitek åtar sig inget produktansvar för felaktig eller oavsiktlig användning av produkten. Marmitek åtar sig inget annat ansvar än det produktansvar som föreskrivs i lag. |
The Marmitek TV Anywhere Wireless HD 2 is a wireless Full-HD HDMI system that enables audio and video signal transmission wirelessly up to 100 meters away. This device is designed to facilitate watching television broadcasts in different rooms without extra cables or moving the set-top box. It works through walls and ceilings, making it a flexible solution for placement in areas such as lofts, bedrooms, or sunrooms.
The system transmits HDMI signals wirelessly at up to 1080p resolution and supports multiple video modes such as 480p, 576p, 720p, and 1080p. The signal can travel up to 100 meters, even through walls and ceilings, without significant quality degradation or delay. This allows you to enjoy HD content anywhere in your home without connecting cables.
The TV Anywhere Wireless HD 2 includes infrared control, enabling remote control of AV devices even if the devices are not visible. The transmitter and receiver support IR signals at frequencies between 20–60 kHz, so you can, for example, change channels from another room. Additionally, the device is compatible with televisions and projectors, increasing its versatility for home entertainment.
The system consists of a transmitter and a receiver connected via HDMI ports. The transmitter is connected to an HDMI source such as a set-top box or Blu-ray player, and the receiver to another television or projector. The devices are ready to use immediately after connection, with no complex installation required.
The transmitter has both HDMI input and output, allowing you to connect multiple devices in series and watch the same content in two different rooms simultaneously. This makes it easier to follow sports broadcasts in different rooms without needing to switch cables or devices.
The system supports HDMI 1.4 standard and HDCP 1.3 copy protection. The audio format is PCM stereo, and the video compression format is H.265. The operating frequency is 5 GHz, and latency is under 120 ms, ensuring smooth video and audio transmission.
The transmitter and receiver measure 115 x 60 x 18 mm and each weigh approximately 170 grams. The power supply operates on 100–240 V AC voltage and converts it to 5 V DC for the devices.
The Marmitek TV Anywhere Wireless HD 2 offers a convenient way to watch HD-quality television or other HDMI sources wirelessly in different rooms without running cables. It is well suited for home use when you want to watch the same content in multiple locations or control AV devices remotely.