The Bambu Lab A1 3D printer represents cutting-edge technology that revolutionizes the field of 3D printing. With innovative additive manufacturing techniques, this printer sets new standards for precision, speed, and versatility. Its sleek design and user-friendly interface make the Bambu Lab A1 a perfect addition to any professional workspace or creative studio. The completely new AMS lite is stylish and reliable, making multi-color 3D printing accessible to everyone.

Key Features:

• Active Flow Rate Compensation: The A1 uses a high-resolution, high-frequency vortex flow sensor to measure nozzle pressure. The algorithm actively compensates for flow rate based on measurements to ensure accurate extrusion.
• Fully Automatic Calibration: The A1 handles all calibrations independently. It automatically calibrates the Z-offset, print bed level, vibration resonance, and nozzle pressure for each print job.
• Quick-Change Nozzle: A next-generation fast-change nozzle that attaches and detaches with a single clip.
• Active Motor Noise Reduction: The A1 calibrates parameters to match the slight differences in each motor, compensating for unwanted motor noise.
• Bed Slinger, CoreXY Speed and Quality: Full metal guide rails, a rigid frame, a nozzle pressure sensor, acceleration sensors, an efficient MCU, and an advanced motion control system enable high-quality printing with a 14-minute benchy print, straight out of the box without special materials.
• Synchronization with Bambu Studio and Bambu Handy: You can control and monitor the printer remotely via the Bambu Studio or Bambu Handy app. With the built-in camera, you can also record time-limited videos.

Technical Specifications:

• Recommended filaments: PLA, PETG, TPU, PVA
• Compatible filament diameter: 1.75 mm
• Nozzle maximum temperature: 300 ºC
• Open filament system: Yes
• Extruder type: Direct drive
• Recommended maximum print speed: 500 mm/s (depends on material)
• Print area: 256 mm x 256 mm x 256 mm
• Print bed maximum temperature: 100 ºC
• Print bed surface: PEI sheet
• Print bed attachment: Magnetic
• Print chamber during process: Open
• Number of extruders: 1

Installation Space / Requirements:

• Overall dimensions: 385 mm x 410 mm x 430 mm
• Net weight: 8 kg
• Maximum power consumption: 1300 W
• Voltage: AC: 100 V / 240 V (50-60 Hz)

Accessories:

• HEPA filter: No
• Filament run-out sensor: Yes
• Filament blockage sensor: Yes
• Power cut-off system: Yes
• Touchscreen: Yes
• Camera: Yes

Connections:

• USB port: No
• WLAN: Yes