The Bambu Lab A1 3D printer represents cutting-edge technology that revolutionizes the field of 3D printing. With innovative additive manufacturing techniques, this printer sets new standards for accuracy, speed, and versatility. Its sleek design and user-friendly interface make the Bambu Lab A1 a perfect addition to any professional workspace or creative studio.
Key Features:
- Active Flow Rate Compensation: The A1 uses a high-resolution, high-frequency vortex flow sensor to measure nozzle pressure. The algorithm actively compensates for flow rate based on measurements to ensure accurate extrusion.
- Fully Automatic Calibration: The A1 handles all calibrations independently. It automatically calibrates the Z-offset, print bed level, vibration resonance, and nozzle pressure for each print job.
- Quick-Change Nozzle: A next-generation quick-change nozzle that attaches and detaches with a single clip.
- Active Motor Noise Cancellation: The A1 calibrates parameters to match the slight differences in each motor, compensating for unwanted motor noise.
- Bed Slinger, CoreXY Speed and Quality: All-metal sliding rails, a rigid frame, nozzle pressure sensor, acceleration sensors, an efficient MCU, and an advanced motion control system enable high-quality printing even with a 14-minute benchy print, straight out of the box without special materials.
- Synchronization with Bambu Studio and Bambu Handy: You can control and monitor the printer remotely via the Bambu Studio or Bambu Handy app. With the built-in camera, you can also record time-lapse videos.
Technical Specifications:
- Recommended filaments: PLA, PETG, TPU, PVA
- Compatible filament diameter: 1.75 mm
- Nozzle maximum temperature: 300 ºC
- Open filament system: Yes
- Extruder type: Direct drive
- Recommended maximum print speed: 500 mm/s (depends on material)
- Print area: 256 mm x 256 mm x 256 mm
- Print bed maximum temperature: 100 ºC
- Print bed surface: PEI sheet
- Print bed attachment: Magnetic
- Print chamber during process: Open
- Number of extruders: 1
Installation Space / Requirements:
- Overall dimensions: 385 mm x 410 mm x 430 mm
- Net weight: 8 kg
- Maximum power consumption: 1300 W
- Voltage: AC: 100 V / 240 V (50-60 Hz)
Accessories:
- HEPA filter: No
- Filament run-out sensor: Yes
- Filament blockage sensor: Yes
- Power cut-off system: Yes
- Touchscreen: Yes
- Camera: Yes
Connections:
