Y70 is a redesigned model of the Y60 chassis. The ATX mid-tower case with dual-chamber design offers next-generation gaming experiences with a massive 4-slot vertical graphics card and huge cooling capacity. At the same time, the components are showcased in the best possible way. Overall, the Y70 is a high-end case solution that combines powerful performance and modern design.

The Y70 supports up to four-slot graphics cards, providing additional airflow between the card and the glass. This allows for easy installation of even the largest and most powerful graphics cards. Additionally, the bottom section can accommodate three 120 mm or two 140 mm fans that direct air straight to the graphics card.

The included premium PCIe 4.0 riser cable makes installing the graphics card easier. It also allows for the installation of half-height PCIe cards behind the vertical graphics card.

Massive cooling capacity: The spacious interior supports the installation of a cooler up to 360 mm long and 125 mm thick on the side, and the case includes an adjustable top bracket where a second 360 mm cooler can be installed. The case has room for up to ten fans, and the over 180 mm clearance with the side glass allows flexible air and liquid cooling.

Unified modern appearance: Four different color options and a three-piece panoramic glass showcase the build stylishly. Thanks to the dual-chamber design, the interior keeps the front neat, and the case offers plenty of space for cable management at the back. Everything is easily accessible thanks to tool-less top and side panels equipped with sliding hard drive trays.

Features:

• Case type: Dual Chamber Mid-Tower, ATX
• Volume: 70.7 L
• Material: ABS plastic, steel, tempered glass
• Internal 2.5″ and 3.5″ bays: 4 x 2.5″ or 2 x 3.5″
• Internal 5.25″ bays: –
• Front panel: 1 x USB-C 3.2 Gen 2, 2 x USB-A 3.2 Gen 1, 1 x microphone/headphone jack
• Expansion slots: 7 half-height slots + 4 full-height slots
• Maximum CPU cooler height: 180 mm
• Maximum graphics card length: 422 mm
• Maximum power supply length: 235 mm
• Dimensions: 470 x 320 x 470 mm
• Weight: 15.4 kg
• Motherboard support: ITX, mATX, ATX, EATX
• Dust filters on bottom, side, and top
• NOTE: The case does not come with fans

Fan mounting locations:

• Front: –
• Top: 3 x 120 mm / 2 x 140 mm
• Rear: 1 x 120 mm / 140 mm
• Side: 3 x 120 mm / 2 x 140 mm
• Bottom: 3 x 120 mm / 2 x 140 mm (max. 32 mm thickness)

Liquid cooling support:

• Front: –
• Top: 120 – 360 mm, 140 – 280 mm (max. 68 mm thickness)
• Rear: 120 mm
• Side: 1 x 120 mm / 140 mm
• Bottom: –