Many consumers prefer Anycubic’s regular UV resin because it ensures the strength of the molded parts and minimizes excessive shrinkage, while also improving print speed, shortening curing time, and maximizing the printing efficiency of LCD machines.

• Main material: Resin monomer and photo initiator
• UV wavelength 365-410 nm
• Base exposure time(s) 20-60 s, normal exposure time(s) 5-15 s

Normal UV resin

The material is rigid and tough. The strong material of the shovel model can easily lead to the model breaking apart, but overly flexible material is prone to deformation or fracture details during printing, which affects the accuracy and aesthetics of molding. The resin is stable in various climatic conditions and is also easy to store, overcoming the shortcomings of other resins.

Professional LCD molding resin

The optimization of the weak light source formation and printing efficiency of LCD is higher than that of market-compatible DLP/LCD/SLA resins. This resin is designed solely for LCD models and is not recommended for DLP or SLA machines. This resin ensures the strength of the molded parts and minimizes excessive shrinkage, while also improving print speed, shortening curing time, and maximizing the printing efficiency of LCD machines.

Strong adhesion and easy release

In addition to a high success rate for printing and accuracy, the resin also minimizes the release force and adhesion, allowing models attached to the molding platform to be easily scooped off, and the low viscosity facilitates cleaning of the machine and model.

Storage method:

Store at room temperature protected from light (sunlight contains a lot of UV light, which solidifies light-sensitive resin. After testing, light does not affect it if it is not UV light). It is recommended to store at a temperature of 15 -35 ; the lower the temperature, the higher the resin viscosity. A closed storage space, excessive dust, or humidity can affect print quality. Sunlight contains a lot of UV light, which solidifies light-sensitive resin.

Usage:

1. Shake well before use, prevent resin use in areas with a lot of sunlight.
2. Use gloves to avoid direct contact with skin and keep the room well-ventilated.
3. Printed models should be cleaned with high-concentration alcohol for about 30 seconds (recommended concentration 95% or higher, the higher the better).
4. Do not pour resin from the resin container into unused resin, and do not leave resin in the resin container unused for a long time to prevent contamination from affecting print results (long periods without resin can be stored in airtight containers or sealed with plastic wrap).
5. The shelf life of the resin is up to 18 months.