Many consumers prefer Anycubic’s regular UV resin because it ensures the strength of the molded parts without excessive shrinkage, while also improving print speed, shortening curing time, and maximizing the printing efficiency of LCD machines.

• Main material: Resin monomer and photoinitiator
• UV wavelength 365-410 nm
• Bottom exposure time(s) 20-60 s, normal exposure time(s) 5-15 s

Regular UV resin

The material is rigid and tough. The strong material of the shovel model can easily lead to the model breaking apart, but overly flexible material is prone to deformation or fracture details during printing, which affects the accuracy and aesthetics of the molding. The resin is stable in various climate conditions and is also easy to store, overcoming the shortcomings of other resins.

Professional LCD molding resin

The optimization of the weak light source formation and printing efficiency of LCD is higher than that of market-compatible DLP/LCD/SLA resins. The resin is designed only for LCD models and is not recommended for DLP or SLA machines. This resin ensures the strength of the molded parts without excessive shrinkage, while also improving print speed, shortening curing time, and maximizing the printing efficiency of LCD machines.

Strong adhesion and easy to detach

In addition to a high success rate in printing and accuracy, the resin minimizes the release force and adhesion, allowing the model attached to the molding platform to be easily scraped off, and the low viscosity facilitates the cleaning of the machine and model.

Storage method:

Store at room temperature protected from light (sunlight contains a lot of UV light, which solidifies the photosensitive resin. After testing, light does not affect it unless it is UV light). It is recommended to store at a temperature of 15 -35 ; the lower the temperature, the higher the resin’s viscosity. A closed storage area, excessive dust, or humidity can affect print quality. Sunlight contains a lot of UV light, which solidifies the photosensitive resin.

Usage:

1. Shake well before use, prevent resin use in areas with a lot of sunlight
2. Use gloves to avoid direct contact with skin and keep the room ventilated
3. Printed models should be cleaned with high-concentration alcohol for about 30 seconds (recommended concentration of 95% or higher, the higher the better)
4. Do not pour resin from the resin container into unused resin, do not leave resin in the resin container unused for a long time to avoid contamination affecting the printing effect (long periods without resin can be transferred to airtight containers or sealed with plastic wrap).
5. The shelf life of the resin is up to 18 months